Oil products separators

Type designation of separators

Type designation of separators

Separators SOR.II

Use

Oil products separators type SOR.II are intended for cleaning waste water containing oil products with the density from 750 to 950 kg.m-3, solution temperature above +4 °C, impurity concentration up to 5000 mg/l in the continuous operation in line with ČSN EN 858 and ČSN 75 6551. Usually such water is waste (rain) water from parking or oiled areas and areas where handling of oil products occurs. Oil products separators type SOR.II are not to be used for cleaning waste water containing oil products in the form of mechanical or chemical stable emulsions. The separators are not intended for removing soluble or saponifiable oils and greases (e.g. of vegetable and animal origin). The separators must not be used for domestic waste water.

Description of the device

Coallescence separators type SOR.II consist of a reservoir and the following built-in units: oil collector, coalescence building-in, operating floor, coalescence filter, scum board, coalescence separator overflow, sorption building-in, sorption filter overflow and the off-take point. It is not necessary that each type contains all of the above parts.
Waste water inflows the sedimentation reservoir where the water flow quiets and suspended solids are settled, eventually the petrol or kerosene are separated.
The other part of the reservoir contains the two-stage coalescence separator. The first stage contains the lamellas, the second stage includes the coalescence filter with filtering foam. The coalescence separator ensures separation of floatable oil products (NES). At the same time, suspended solids with the diameter above 0.2 mm and density above 1100 kg/m3 are separated. The function of this unit is ensured if the non-polar extractable substances (NES) are not emulsified and the suspended solids (SS) are not dispersed. The separated oil products are retained by the scum board and then manually drawn off to the oil collector.
The sorption filter makes use of dynamic adsorption. The service life of the sorbent is influenced markedly by the input soiling by suspended solids and the concentration of oil products on the input. The NES are adsorbed on the Fibroil surface only if they are not in the form of stable emulsions.

schema

Basic parameters for the selection of SOR.II type 

Types of separators SOR.II -.- JKS JK KS K S
Max. allowed input soiling by oil products mg/l 5 000 5 000 5 000 5 000 10
Guaranteed max. output soiling by non-emulsified NES mg/l 0,5 resp 0,2 5 0,5 resp 0,2 5 0,5 resp 0,2

Basic parameters

SOR.II -..- S - sorption filter

separator size 0,5 1 2 5 10 20
maximum flow l/s 0,5 1 2 5 10 20
separator length L mm 800 800 1200 1400 2400 2600
separator width B mm 800 800 800 1600 1600 2400
separator height H mm 1280 1280 1280 1280 1280 1680
overall separator weight kg 110 110 140 250 380 680

SOR.II -..- K - coallescence separator

separator size 0,5 1 2 5 10 20
maximum flow l/s 0,5 1 2 5 10 20
separator length L mm 1200 1800 2400 2800 4200 4800
separator width B mm 800 800 800 1600 1600 2400
separator height H mm 1280 1280 1280 1280 1280 1680
overall separator weight kg 150 190 240 420 580 990

SOR.II -..- KS - coallescence separator, sorption filter

separator size 0,5 1 2 5 10 20
maximum flow l/s 0,5 1 2 5 10 20
separator length L mm 1800 2400 3400 3800 6200 7200
separator width B mm 800 800 800 1600 1600 2400
separator height H mm 1280 1280 1280 1280 1280 1680
overall separator weight kg 210 240 340 560 840 1500

SOR.II -..- JKS – sedimentation collector, coallescence separator, sorption filter

separator size 0,5 1 2 5 10
maximum flow l/s 0,5 1 2 5 10
separator length L mm 2000 2600 4200 4400 7600
separator width B mm 800 800 800 1600 1600
separator height H mm 1280 1280 1280 1280 1280
overall separator weight kg 220 260 390 620 940

Separators SOR.II-ZP

Separators for increased flow rate are suitable for gravity separation of oil products mainly from rain water from parking areas of all kinds and for areas where handling of oil products does not occur and the input concentration of oil products does not exceed 35 mg/l. Oil products separators type SOR.II-..-..-ZP are intended for cleaning waste water containing oil products with the density from 750 to 950 kg.m-3, solution temperature above +4 °C, impurity concentration usually 100 mg/l. Oil products separators type SOR.II-..-..-ZP are not to be used for cleaning waste water containing oil products in the form of mechanical or chemical stable emulsions, petrol and kerosene. The efficiency of separation decreases markedly with increasing content of suspended solids. The separators are not intended for removing soluble or saponifiable oils and greases (e.g. of vegetable and animal origin). The separators must not be used for domestic waste water. They are supplied as coallescence separators with the guaranteed input soiling up to 5 mg/l NES or as sorption separators with the guaranteed input soiling up to 0.2 mg/l NES.

schema

Basic parameters for the selection of SOR II. - ZP type

Types of separators SOR.II -.- JKS - ZP JK - ZP KS - ZP K - ZP S - ZP
Max. allowed input soiling by oil products mg/l 100 100 100 100 10
Guaranteed max. output soiling by non-emulsified NES mg/l 0,5 resp. 0,2 5 0,5 resp. 0,2 5 0,5 resp. 0,2

SOR.II -..- JKS - ZP - sedimentation collector, coallescence separator, sorption filter - increased flow rate

separator size 10 20 35 50 65
maximum flow l/s 10 20 35 50 65
separator length L mm 3000 4800 6000 6600 8000
separator width B mm 1600 1600 2000 2400 2400
separator height H mm 1680 1680 2280 2480 2480
overall separator weight kg 600 900 1550 1850 2150

SOR.II -..- JK - ZP - sedimentation collector, coallescence separator - increased flow rate

separator size 10 20 35 50 65 80 100
maximum flow l/s 10 20 35 50 65 80 100
separator length L mm 2000 3600 4200 4800 6000 7200 8000
separator width B mm 1600 1600 2000 2400 2400 2400 2400
separator height H mm 1680 1680 2280 2480 2480 2480 2480
overall separator weight kg 480 700 1100 1500 1750 2050 2250

Basic parameters SOR.II -..- KS - ZP

separator size 10 20 35 50 65 80 100
maximum flow l/s 10 20 35 50 65 80 100
separator length L mm 2400 3400 4200 4200 5600 6600 7800
separator width B mm 1600 1600 2000 2400 2400 2400 2400
separator height H mm 1680 1680 2280 2480 2480 2480 2480
overall separator weight kg 540 760 1300 1500 1800 1950 2150

Basic parameters SOR.II -..- K - ZP

separator size 10 20 35 50 65 80 100
maximum flow l/s 10 20 35 50 65 80 100
separator length L mm 1600 2000 2400 2400 3000 3400 4000
separator width B mm 1600 1600 2000 2400 2400 2400 2400
separator height H mm 1680 1680 2280 2480 2480 2480 2480
overall separator weight kg 440 550 800 1150 1300 1500 1650

Basic parameters SOR.II -..- S - ZP

separator size 10 20 35 50 65 80 100
maximum flow l/s 10 20 35 50 65 80 100
separator length L mm 1200 1600 2000 2400 2800 3600 4000
separator width B mm 1600 1600 2000 2400 2400 2400 2400
separator height H mm 1680 1680 2280 2480 2480 2480 2480
overall separator weight kg 350 430 590 970 1070 1270 1370

Both SOR.II. and SOR.II.ZP have been certified by an authorized person of the Technical and Test Institute for Construction s.p., Prague, and the Declaration of Conformity has been accorded to them.

Advantages:

Up | Print | RSS | Statement of accessability | Map
design & copyright SCARON, s.r.o.

FORTEX-AGS, a.s. Jílová 1550/1, 787 01 Šumperk
www.fortex-ags.cz